The structure for control rooms is made completely from zinc coated steel, with under-head adjustment, and comprises the following elements:■ Support pedestal with zinc galvanization surface treatment (yellow passivated) and height adjustment, made up of:□ circular base, 100mm diameter, 2mm thick, featuring stiffening ribs and diameter holes for mechanical anchoring to the ground, if required;□ variable-length pipe based on the height of the floor, tightly pressed into the pedestal, available in the following versions;− outside diameter 24mm, 2mm thick;− outside diameter 26mm, 3mm thick;□ M20 threaded bar, firmly fixed to the head and featuring an M20x10mm nut for locking at the final height;□ flat head measuring 120x120mm, 5mm thick, featuring radial slotted holes for positioning and fastening the stringers.

For the load application of dynamic loads not only the floor covering but also the used adhesives are of decisive importance in order to prevent“wave formation” of the floor covering caused by the rolling loads. A personal consultation is absolutely necessary

• Panel

-Huge portfolio of coverings available

– High density calcium sulfate core

– Aluminium foil/galvanized steel sheet

– Self-extinguishing plastic edgebanding

• Structure

– Galvanized steel pedestal

– Self-extinguishing head gasket

– Galvanized steel with stringers

– Self-extinguishing stringer gasket

Possibility to incorporate differenttype of covering (such as HPLlaminate, vinyl, rubber, parquet,stone, porcelain gres, etc…) coupledwith different size of the panels