K6D DC Current meter




Vutlan · Sensors
The K6D DC is a simple open-loop DC ammeter capable of measuring currents from 0A to 50, 100, 200, 300, 400, 500A. It connects to the monitoring system via the VT405 transceiver.
- Rated input (Adc): 50A, 100A, 200A, 300A, 400A, 500A (see order options)
- Measured range: 0-50, 0-100, 0-200, 0-300, 0-400, 0-500 Adc (see order options)
- Rated output: 0-5Vdc
- Supply Voltage: +12 Vdc
- Plug-and-play — automatically detected on any Vutlan analog port
- Place up to 100 m from the monitoring unit using RJS extension cables
Available in Israel exclusively through Somet Integration — local stock, pricing, project design, installation support and warranty.
K6D DC Current meter
The K6D DC is a simple open-loop DC ammeter capable of measuring currents from 0A to 50, 100, 200, 300, 400, 500A. It connects to the monitoring system via the VT405 transceiver.
This plug-and-play transceiver easily connects to any analog port of Vutlan monitoring devices.
Key features
- Rated input (Adc): 50A, 100A, 200A, 300A, 400A, 500A (see order options)
- Measured range: 0-50, 0-100, 0-200, 0-300, 0-400, 0-500 Adc (see order options)
- Rated output: 0-5Vdc
- Supply Voltage: +12 Vdc
- Accuracy: ≤±1.0 %
- Plug-and-play — automatically detected on any Vutlan analog port
- Place up to 100 m from the monitoring unit using RJS extension cables
- Add more analog ports with the VT408 sensor extension unit
| Used for | Measure Direct Current |
| Rated input (Adc) | 50A, 100A, 200A, 300A, 400A, 500A (see order options) |
| Measured range | 0-50, 0-100, 0-200, 0-300, 0-400, 0-500 Adc (see order options) |
| Rated output | 0-5Vdc |
| Load resistance | ≤250 Ω (for measured range 0-50, 0-100, 0-200 Adc) ≥10 KΩ (for measured range 0-300, 0-400, 0-50 Adc) |
| Offset current | ≤±0.1 mA (for measured range 0-50, 0-100, 0-200 Adc) ≥15 mV (for measured range 0-300, 0-400, 0-50 Adc) |
| Supply Voltage | +12 Vdc |
| Accuracy | ≤±1.0 % |
| Linearity error | ≤±1.0 % |
| Response time | ≤ 20 mS |
| Power consumption | ≤ 50 mA (for measured range 0-50, 0-100, 0-200 Adc) ≤ 20 mA (for measured range 0-300, 0-400, 0-50 Adc) |
| Bandwidth | DC-2.0KHz |
| Insulation voltage | AC 2.5KV 50Hz 1min |
| Operating temperature | -10~ +70°C |
| Storage temperature | -25~ +85°C |
| Through hole | 21 mm |
| Phase | Single |
| Coil Structure | Toroidal |
| Coil Number | Auto-transformer |
| Net Weight | 67g |
| Outputs | 4 pin terminal, pitch 3.81mm, G: ground M: 0-5V output G: Ground |
| HS Code | 9030 33 100 |
- DC Power Distribution Monitoring: Measures load current from DC Hall effect transducers installed on battery strings, DC busbars, and distribution lines, enabling remote supervision of power consumption, overload detection, and circuit health.
- Battery System Current Monitoring: Monitors charge and discharge currents in battery banks, UPS systems, and energy storage systems to track performance, detect abnormal current flow, and optimize battery life.
- DC Equipment Monitoring: Supervises telecom rectifiers, DC motors, solar controllers, EV chargers, and industrial DC-powered equipment to detect operational changes, unexpected load variations, and fault conditions. You’re out of messages with the most advance
- Order Options / Stocked by Vutlan
- K6D DC 100:
- Rated input: 100A
- Measured range: 0-100 Adc
- Not stocked – 3rd party
- Available for direct order from Vutlan for larger quantities only.
- K6D DC 50:
- Rated input: 50A
- Measured range: 0-50 Adc
- K6D DC 200:
- Rated input: 200A
- Measured range: 0-200 Adc
- K6D DC 300:
- Rated input: 300A
- Measured range: 0-300 Adc
- K6D DC 400:
- Rated input: 400A
Recommended Vutlan products to use with this item:
Documents are hosted by the manufacturer, Vutlan.
Request a quote
Somet Integration is the exclusive distributor of Vutlan in Israel. Get local pricing, stock availability, project design and technical support for the K6D.
Prefer to talk? Call 1-700-700-193, email somet@sometltd.com or message us on WhatsApp.









